1. The processing factors of non -standard precision parts are poor processing accuracy of the parts itself. Generally speaking, if the dynamic error between the axis is not adjusted, or the axis transmission chain changes due to wear, it will affect the accuracy of the part. Generally speaking, the accuracy of this error can be resolved by re -adjusting the amount of compensation. If the error is too large or even alarm, you need to check the servo motor to see if its speed is too high.
2. The factor is that the super adjustment of the machine tool during operation will also affect the processing accuracy. It may be that the speed of slowing down is too short. Properly extend the replacement time. Of course, it is also likely that the links of the screw and servo motor are loose.
3. The factor is that the circularity of the two -axis linkage is super poor, the machine adjustment is improper, forming a circular axial deformation, incorrect compensation for the shaft bar gap, or the shift of shaft positioning, which may affect the precision of the precision parts and have an impact.