Process Name : Microhole Machining (Probe Hole)

Process Features : 1. Metal or non-metal (engineering material); 2. The hole diameter is less than 0.05mm; 3. The hole wall is smooth, free of dust and debris

Processing accuracy : Perspective positioning film

process characteristics : 1. Difficulty in forming stainless steel sheets; 2. The required height for the lens to avoid the angle of the ruler is less than 0.1mm; 3. Low yield of processing technology

Process name : Perspective positioning film

Process features : 1. Difficult to form stainless steel sheet; 2. High requirements for lens avoidance ruler angle < 0.1mm; 3. Low yield rate of processing technology

Process name : beryllium copper shrapnel

Process features : 1. Guaranteed elasticity after high temperature; 2. IC or chip clamping angle; 3. Electrical resistivity

Process name : beryllium copper shrapnel

Process features : 1. Guaranteed elasticity after high temperature; 2. IC or chip clamping angle; 3. Electrical resistivity

Process name : beryllium copper shrapnel

Process features : 1. Guaranteed elasticity after high temperature; 2. IC or chip clamping angle; 3. Electrical resistivity

Material : ADC12

Surface treatment : Natural color oxidation

Processing accuracy : ±0.1mm

Material : ADC12

Surface treatment : Oxidation

Processing accuracy : ±0.1mm

Material : ADC12

Surface treatment : Natural color oxidation

Processing accuracy : ±0.1mm

Material : ADC12

Surface treatment : Natural color oxidation

Processing accuracy : ±0.1mm

Material : ADC12

Surface treatment : Natural color oxidation

Processing accuracy : ±0.1mm

Material : ADC12

Surface treatment : Natural color oxidation

Processing accuracy : ±0.1mm